Related Manuals for Dorel covet
Summary of Contents for Dorel covet
- Page 1 4 wheel stroller manual follow us on the only choice motherschoice.com.au...
-
Page 2: Table Of Contents
assembling the stroller Components list ........4 Opening stroller ........5 Fitting seat .......... 6 contents Wheels assembly ....... 7 Bumper bar .......... 8 Canopy ..........9 using the stroller Front swivel wheels ......10 Operating brakes ........ 11 Reverse seat ........12 Adjusting handle &... - Page 3 IF YOU ADJUST THE STROLLER, OTHERWISE THEY MAY BE INJURED. • A harness can form loops that may be a strangulation hazard, never leave harness straps connected when not fitted to a child in the stroller. • Remove child from the stroller before going up or downstairs or escalators. • Use the tether strap to prevent the stroller rolling away (see page 10). • Do not allow children to stand on the seat or footrest. • Do not attempt to lift the stroller by the bumper bar or child tray, if it has one. • Remove the child from the stroller before going up or down stairs or escalators. • Regularly inspect the stroller for any parts that are loose, broken, torn or missing. Attend to the problem as soon as it is noticed. • Use only those accessories which are supplied by Dorel Australia, and approved for use with this stroller. • Do not use the stroller near an open fire, barbecue, or exposed flame. • This product is not intended for commercial use. • Do not run or jog with this stroller. • The Covet 4 wheel stroller has been approved in accordance with AS/ NZS 2088/2009. • Weight of the child using this stroller should not be more than 17kg. • Maximum weight for shopping basket 4kg. • Cup holder 1kg.
-
Page 4: Components List
4 wheel stroller components list K Front wheels A Handle F Seat release button (both sides) B Handle adjustment L Swivel locks G Legrest adjustment (both sides) M Adjustable legrest button C Folding lock H Brake lever N Safety harness... -
Page 5: Opening Stroller
4 wheel stroller assembling stroller Step 1: opening stroller • If the stroller has a security tie, please remove it. • Release the storage latch (Figure 1a). • Lay stroller on the side, simultaneously lift handle while pulling on the frame until the locking mechanism engages (Figure 1b). - Page 6 4 wheel stroller assembling stroller Step 2: rear wheel assembly push • Slide rear wheels onto the frame of the stroller (Figure 2a). • Push the wheels in until you hear them click! lock in place. Listen for ‘click’.
-
Page 7: Fitting Seat
4 wheel stroller assembling stroller push click! Step 4: fitting seat • Align the seat with the frame and push, listening for a ‘click’ to lock in place (Figure 4a). • Adjust the legrest by pressing both adjustment buttons and rotating to the desired position (Figure 4b). -
Page 8: Bumper Bar
4 wheel stroller assembling stroller Step 5: attach bumper bar • Align bumper bar shaft with the hole in the frame and push in (Figure 5a). • Listen for the ‘click’, then repeat on the other side. Removing bumper bar pull (2) • To remove bumper bar, press... -
Page 9: Canopy
4 wheels stroller assembling stroller Step 6: attaching canopy • Align both canopy ends with the plastic sliders on the frame (Figure 6a). • Slide the ends of the canopy down until they are fully engaged. • Push both the locking tabs down (Figure 6b). -
Page 10: Using The Stroller
4 wheel stroller using stroller Operating front swivel wheels • Position the front wheel as per Figure 7a. • To lock, align the swivel lock button with the frame and push upwards (Figure 7b). • To unlock, push the swivel lock button downwards (Figure 7c). -
Page 11: Operating Brakes
4 wheel stroller using stroller Operating brakes • To apply the brake, press down firmly on the brake pedal using the ball of your foot (Figure 8a). • To release the brake, lift the brake pedal until the brakes have fully disengaged (Figure 8b). push mother’s choice tip... -
Page 12: Reverse Seat
4 wheel stroller using stroller to face seat in opposite direction lift (2) • Press the seat release button on both sides and lift seat (Figure 9a). • Turn the stroller seat around and align with the frame and gently push down (Figure 9b). -
Page 13: Adjusting Handle & Legrest
4 wheel stroller using stroller press both sides adjusting handle • Press both adjustment buttons simultaneously (Figure 10a). • Rotate to the desired position (Figure 10b). adjusting legrest • Press both adjustment buttons simultaneously and rotate to the desired position (Figure 11). -
Page 14: Adjusting Backrest
4 wheel stroller using stroller Operating the backrest recline lever • Lift the lever (Figure 12a) and rotate the seat into the desired position (Figure 12b) lift rotate mother’s choice tip... The backrest can be adjusted into 3 different positions. -
Page 15: Harness Adjustment Buckle
4 wheel stroller using stroller WARNING harness adjustment buckle Use this harness at all times. • The harness strap can be adjusted by A five-point harness is moving each strap’s slider (A) (Figure 13a). provided to secure your child. • The buckle is released by pressing the When not in use disconnect centre button (Figure 13b). -
Page 16: Adjusting Harness Height
4 wheel stroller using stroller lower slot adjusting harness height upper slot • The harness can be set at two heights, as displayed in Figure 14a and14b. • To use the lower slot, undo the buckle and feed the shoulder straps in through the loop (Figure 14c) before securing harness. -
Page 17: Tether Strap
4 wheel stroller using stroller tether strap • Whenever a child is in the stroller and brakes are NOT engaged, the large loop should be around your wrist (Figure 15). WARNING Correct use of the tether strap will prevent stroller runaway and... -
Page 18: Folding Stroller
4 wheel stroller using stroller folding stroller • Fold the canopy back. press (1) • Unlock the swivel wheels. • Apply all brakes. • Adjust the seat backrest to full layback pull (2) position. • Press and pull folding lock on the right... -
Page 19: Unfolding Stroller
4 wheel stroller using stroller unfolding stroller • Release the storage latch (Figure 17a). • Lift handle until stroller is fully open and locking mechanism engages (Figure 17b). • Push down on the handle to check that the locks have been fully engaged. -
Page 20: Accessories
4 wheel stroller accessories raincover • Spread the raincover over the stroller and pull over the seat (Figure 17). Use elastic straps to secure to stroller. Cupholder • Slide cupholder onto mounting bracket on stroller frame (Figure 18). • Maximum weight for cupholder is 1kg. -
Page 21: Care And Maintenance
4 wheel stroller care and maintenance • Always store in a clean and dry place. • Clean the frame by wiping with a damp cloth. • Do not use abrasives, bleach or strong detergents. • Spot clean fabrics with warm water and mild soap. - Page 22 notes:...
-
Page 23: Product Registration
mother’s choice tip... follow us on motherschoice.com.au Visit us online to register your new Mother’s Choice product. www.motherschoice.com.au/product-registration benefits of registration • Your safety - allows us to contact you with important product notifications. • Confirmation of ownership - provides a record in case of product loss or theft. • Improved product development - helps us continue to design products that meet your needs. to prevent loss or fading, please attach your receipt here:... -
Page 24: Customer Service
14 Sir William Avenue East Tamaki Auckland 2013 Email: customerservice@igc.co.nz Phone: 0800 628 000 (toll free) Hours: 8:00 am - 5:00 pm Monday to Friday Specifications are subject to change without notice. Copy or reproduction without permission is prohibited. © 2013 Dorel Australia Pty Ltd. All Rights Reserved. www.dorel.com.au...
Need help?
Do you have a question about the covet and is the answer not in the manual?
Questions and answers