Installation accessories Vitodens 111-W
Installation aid for installation on unfinished walls
Part no. 7248 401
Components:
■ Wall mounting bracket
■ Mounting gauge
■ Mounting bracket with shut-off valves
■ Drain & fill valve
■ Safety valve on the DHW side 10 bar (1 MPa)
■ Angle gas valve R ½ with thermally activated safety shut-off valve
■ 2 pipe sections G ¾ to 18 mm with fitting
■ 3 pipe sections G ½ to 15 mm with fitting
Part no. 7248 400
Components:
■ Wall mounting bracket
■ Mounting gauge
■ Mounting bracket with shut-off valves
■ Drain & fill valve
■ Safety valve on the DHW side 6 bar (0.6 MPa)
■ Angle gas valve R ½ with thermally activated safety shut-off valve
■ 2 pipe sections G ¾ to 18 mm with fitting
■ 3 pipe sections G ½ to 15 mm with fitting
■ Seal rings
VITODENS
(cont.)
Part no. 7248 399
Components:
■ Wall mounting bracket
■ Mounting gauge
■ Mounting bracket with shut-off valves
■ Drain & fill valve
■ Safety valve on the DHW side 10 bar (1 MPa)
■ Gas angle valve G ¾
■ 2 pipe sections G ¾ to 18 mm with fitting
■ 3 pipe sections G ½ to 15 mm with fitting
■ Seal rings
Part no. 7248 398
Components:
■ Wall mounting bracket
■ Mounting gauge
5
VIESMANN
35