VC4G & VC6G SERIES FULL SIZE CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
Fig. 9
F24682 Rev. D (1016)
TEMPERATURE PROBE (VC4GD/
1.
Remove the Right Side Panel.
NOTE: If right side panel is not accessible, this
component can be serviced by removing the Control
Panel.
2.
Disconnect the probe leads from the solid state
temperature control.
3.
Remove the racks and right rack support.
4.
Remove the probe guard.
Page 10 of 75
Fig. 10
6GD)
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.