Table of Contents
Advertisement
TDM02
Display Interface
Std. - 1/4 DIN
Panel Mounted
Cover = 4.06" W x 4.06" D
Panel Cutout = 3.53" W x 3.53" H
Depth = 1.08" D
AM02+
7.5" W x 3.38" H x 1.89" D
Mounts on supplied Snap Track
TM02
5.25" W x 3.75" H x 1.75" D
Mounts on supplied Snap Track
Process Indication Output
The TM02 multifunctional timer control features a Process Indication Out-
put. Processes 1 thru 8 have a dedicated pair of terminals, labeled 1 thru 8
on the TM02. An indicator (LED, relay coil, etc...) 24 VDC 2W maximum
can be wired directly to the corresponding terminal block for each Pro-
cess to be indicated. Note Polarity
Program Indication Output
Terminal #9 is used to indicate the controller is operating within a Pro-
gram. The following voltage will be measured across the #9 terminals:
Note Polarity
Controller in the "READY" position
Controller operating in any of the 8 processes making up a Program
© 2006 Maxitrol Company, All Rights Reserved
Other Features
(see Wiring Diagram, page 6)
5
Dimensions
0 VDC
24 VDC 2W max
Advertisement
Table of Contents
