Telefunken T32TX275DLBPOS Operating Instructions Manual page 7

Connections
Connector Type
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
SPDIF
(Coaxial Out)
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
LAN
Ethernet
Connection
(back)
RF Input connects to an aerial or cable system. (depends on model)
SAT
Satellite (LNB) Input connects your TV to a satellite system. (depends on model)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
PC/YPbPr Audio
Cables
(not supplied)
Side AV Connection
Cable ( not supplied)
PC to YPbPr Connection
Cable (not supplied)
LAN / Ethernet Cable
English - 6 -
Device
NOTE: When connecting a
device via the YPbPr or Side
AV inputs, you must use the
connection cables to enable
connection. See the illustrations
o n t h e l e f t s i d e . | You can
use YPbPr to VGA cable (not
supplied) to enable YPbPr signal
via VGA input. | You cannot use
VGA and YPbPr at the same time.
| To enable PC/YPbPr audio, you
will need to connect the side
audio inputs with a PC/YPbPr
audio cable's (not supplied)
RED and WHITE jacks. | If an
external device is connected via
the SCART socket, the TV will
automatically switch to AV mode.|
When receiving DTV channels
(Mpeg4 H.264) or while in Media
Browser mode, output will not be
available via the scart socket. |
When using the wall mounting
kit (available from third party
in the market, if not supplied),
we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the
module instruction manual for
details of the settings. | The/Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. | By connecting an HDMI cable
to your TV, you have to use only a
shielded HDMI cable to guarantee
a sufficient immunity against
parasitic frequency radiation.