Prepare Measurement - Beurer BC 32 Instructions For Use Manual

Icons in the display:
1. "Change battery" icon
2. Error icon EE
3. Systolic pressure
4. Cardiac arrhythmia icon „
Define of AM => 4:00 ~ 11:59
5. mmHg unit
Define of PM => 18:00 ~ 1:59
6. Icon for users 1, 2
7. Diastolic pressure 7 day average calculation is add up all
8. Time and date
records and get average within last 7day
9. Number of memory space
10. Pulse icon
11. Measured pulse
12. WHO - classification
13. Memory display day/night
(A,P: AM, PM)
8
All average
5
1
9
4
11
Last result
2
"
6
10
13
7 day average PM
7 day average AM
3
12
7
First result Clear Memories
EE

4. Prepare measurement

Inserting battery
• Remove the battery co­
ver (left side of the unit).
• Insert two 1.5 V micro
batteries (alkaline, type
LR 03).
Make absolutely sure that you insert the batteries with the
correct polarity as marked.
Do not use rechargeable batteries.
• Replace the battery cover carefully.
If the ‚change battery' icon
measurement is no longer possible and you must
replace all the batteries.
Note: You will find these markings on batteries
containing harmful substances: Pb = battery con­
taining lead, Cd = battery containing cadmium, Hg = battery
containing mercury.
setting date and time
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time.
Proceed as follows to set the date and time:
• Switch on the blood pressure monitor with the „ " button.
• Press the function key for over 5 seconds „ "
• The month starts flashing. Using the „+" function key, set the
month 1 to 12 and confirm with the function key„ "
• Set the day, hour and minute and confirm in each case with
the function key„ "
12
is displayed,