SECTION 1
You cannot use your Keurig
IMPORTANT:
until it has been set-up for its first use.
If the brewer has been exposed to
NOTE:
temperatures below freezing, allow the brewer
at least two hours to reach room temperature
before brewing. A frozen or extremely cold
brewer will not operate.
Keurig
requires the use of an external
®
WARNING:
water filter. Failure to use a filter invalidates
the brewer Warranty.
Plumbing & Set-Up
brewer
®
Filter and Plumbing Instructions
1
fig.
Your K150C Plumbed brewing system requires
the use of an external water filter. Valid
options include an external filter mounted to
the rear surface of the brewer or an external
filter mounted to a nearby wall.
To mount the filter to your brewer, simply
loosen the two screws, hang the filter and
tighten the two mounting screws (be careful
2
fig.
not to over tighten) (fig. 1).
To mount the filter to a nearby wall, please
follow the filter's User Instructions.
Once the external filter is mounted to either
the brewer (fig. 2) or wall, connect the filter
to the Inlet Plumbing Port by using a 3/4 BSP
Tap Adapter (fig. 3) and turn on the
water supply.
3
fig.
6
Need help?
Do you have a question about the K150C and is the answer not in the manual?