Display - Emerson zv427em5 Owner's Manual

Display

SETUPS
Press [C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
1
select "General Setting", then press
[OK].
Use [K / L] to select "Display", then
2
press [OK].
Use [K / L] to select a desired item,
3
then press [OK].
1
OSD Language
2
Screen Saver
3
FL Dimmer
Selection menu will appear.
4
Refer to 1 to 3 on this page and set
the selected item.
5
When you finish with setting, press
[SETUP] to exit.
1
OSD Language (Default : English)
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
2
Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
3
FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K / L] to select a setting, then press [OK].
If "Auto" is selected, the display gets dark when the
power is in the standby mode.
OSD Language
English
Français
Español
Screen Saver
OFF
1 minute
5 minutes
10 minutes
15 minutes
FL Dimmer
Auto
Bright
Dark
EN EN 77