Satellite Link - Emerson zv427em5 Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear)
with the external tuner. (The connection from L2 cannot
read any signals from the external tuner.)
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.

SATELLITE LINK

1
2
3
4
5
6
7
Press [SETUP].
Use [K / L] to select "Timer
Programming", then press [OK].
Use [K / L] to select "Satellite Link",
then press [OK].
Timer Programming
Timer Programming
Satellite Link
Use [K / L] to select the time, media
and recording mode, then press [OK].
Satellite Link
DVD
Start Mode
VCR
5:00PM DVD SP
To Standby Mode
Use [K / L] to set the desired starting
B
time, then press [ ].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [{].
Use [K / L] to select a recording
media ("DVD" or "VCR"), then press
B
[ ].
Use [K / L] to select the recording
mode.
Refer to page 27 for details.
Instructions continue on the next page.
EN EN 35