Formatting A Disc; Dvd-Rw - Emerson zv427em5 Owner's Manual

Hide thumbs Also See for zv427em5:
Table of Contents

Advertisement

Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW, the unit automatically starts to initialize the disc. DVD-RW will be formatted
either video or VR mode according to the recording format mode setting of the unit. Before inserting a brand-new
DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it
has been used.
Note
The recording format setting is effective only for DVD-
RW. You cannot change the recording format for a
DVD-R.
You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the "Setup" menu only. To reformat a disc
(change disc format type), refer to "Reformatting a
Disc Manually" on page 60.

FORMATTING A DISC

1
Press [SETUP].
Use [K / L] to select "DVD Menu",
2
then press [OK].
Setup
General Setting
Timer Programming
Title List
DVD Menu
Use [K / L] to select "Format", then
3
press [OK].
DVD Menu
Format
Finalize
Use [K / L] to select "Format Mode",
4
then press [OK].
DVD Menu
Format
Finalize
Start
Format Mode
Use [K / L] to select "Video mode" or
5
"VR mode", then press [OK].
6
Press [SETUP] to exit.
7
Insert a brand-new disc.
Formatting will start.
Formatting
8
Formatting is completed.
"100%" is indicated.
90%
EN
EN
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents