Before You Start; Finding The Viewing Channel On Your Tv - Emerson zv427em5 Owner's Manual

After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.

Finding the Viewing Channel on Your TV

Input Mode Names for Common TV Brands (Example)
Admiral AUX
Curtis LINE1, LINE2,
Mathis 00, 90, 91, 92, 93
GE INPUT, TV/VCR,
00, 90, 91, 92, 93
Hitachi INPUT, AUX
JVC VIDEO, VIDEO 1,
VIDEO 2, VIDEO 3
Kenwood AUX
LXI-Series 00
Funai AUX CHANNEL
Note
• Video input selection varies for different brand's
models of TVs.
• Consult your TV manufacturer if none of the above
are successful.
20 EN EN

BEFORE YOU START

Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
00, 90, 91, 92, 93
Samsung TV/VIDEO
Sanyo VIDEO
Sharp 00
Sony VIDEO1, VIDEO2,
VIDEO3
Toshiba TV/GAME
Zenith 00
1
After you have made all the
necessary connections, press [y y ] to
turn on the unit.
2
Turn on your TV.
• If connected to your VCR make sure it is
switched off or in standby mode before
proceeding.
3
Press "2" on the TV's remote control,
then press channel down button
repeatedly until you see "Initial
Setup" menu.
Initial Setup
OSD Language
English
Français
Español
Select the language for Setup display.
This is the correct viewing channel (external
input channel) for the recorder.
• For some TVs, there may be a button on the
TV's remote control that accesses the external
input channel. It may be labeled "SOURCE",
"AV" or "SELECT". In such case, press it
repeatedly. Refer to your TV's user manual for
details.
• If more than 10 minutes have passed since you
have turned on the unit, you may see the
screen saver instead of "Initial Setup" menu.
Screen saver:
4
Proceed to step 2 in "INITIAL
SETTING" on page 25.