Yamaha Tmax XP500 2016 Owner's Manual page 33

For the UK:
Push the "RESET" button to switch the
display between the ambient tempera-
ture display "Air", the average fuel con-
sumption mode "AVE_ _._ MPG" and
the instantaneous fuel consumption
mode "MPG" in the following order:
Air  AVE_ _._ MPG  MPG  Air
Ambient temperature display
1
1. Ambient temperature display
This display shows the ambient tem-
perature from –9 C to 40 C in 1 C in-
crements.
For the UK:
15 F to 104 F in 1 F increments.
The temperature displayed may vary
from the ambient temperature. Pushing
the "RESET" button switches the ambi-
ent temperature display to the average
fuel consumption and instantaneous
fuel consumption modes.
Instrument and control functions
Average fuel consumption mode
1. Average fuel consumption display
Since it was last reset, this mode calcu-
lates the average fuel consumption rate
of the vehicle.
For the UK:
The average fuel consumption is dis-
played "AVE_ _._ MPG".
To reset the average fuel consumption
mode, select it by pushing the "RESET"
button, and then push the "RESET"
button for at least one second.
TIP
After resetting an average fuel con-
sumption mode, "_ _._" is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).
4-8
1

When the display is set to "AVE_
_._ km/L", the average distance
that can be traveled on 1.0 L of fuel
is shown.

When the display is set to "AVE_
_._ L/100 km",
amount of fuel necessary to travel
100 km is shown.

For the UK: When the display is
set to "AVE_ _._ MPG", the aver-
age distance that can be traveled
on 1.0 Imp.gal of fuel is shown.
1
2
3
4
5
6
7
8
the average
9
10
11
12
13
14