Vivotek IP8355H User Manual page 95

Select Stream: Select stream #1 to set up the e-PTZ control. Please note that each stream can
possess its own preset and patrol settings. For detailed information about how to set up preset and
patrol settings, please refer to page 94.
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed
control.
When completed with the e-PTZ settings, click Save to enable the settings on this page.
Home page in E-PTZ Mode
■ The e-Preset Positions will also be displayed on the home page. Select one from the drop-down
list, and the Network Camera will move to the selected e-preset position.
■ If you have set up different e-preset positions for different streams, you can select one of the
video streams to display its separate e-preset positions.
Global View
In addition to using the e-PTZ control panel, you can also use the mouse to drag or resize the
floating frame to pan/tilt/zoom the viewing region. The live view window will also move to the
viewing region accordingly.
Moving Instantly
If you check this item, the live view window will switch to the new viewing region instantly after
you move the floating frame. If deselected, the process moving from one point to the other will be
shown, yet it is not easy to observe if the move is not over a long distance.
Click on Image
The e-PTZ function also supports "Click on Image". When you click on any point of the Global View
Window or Live View Window, the viewing region will also move to that point.
on Image" function only applies when you have configured a smaller "Region of Interest" out of the
maximum output frame! e.g., a 800x600 region from the camera's 1280x800 maximum frame size.
x3.3
VIVOTEK
Note that the"Click
User's Manual - 95