Table of Contents
Advertisement
Igniting the gas burners
1. Keep the burner knob pressed in.
2. Turn the knob counter clockwise to the
large flame symbol.
The gas is ignited with the spark created.
3. Adjust the knob to the desired cooking
power.
Turning off the gas burners
Turn the keep warm zone knob to off (upper)
position.
Gas shut off safety system (in models
with thermic component)
1. Gas shut
off safety
Push the knob inwards and turn it counter
clockwise to ignite.
After the gas ignites, keep the knob
pressed for 3-5 seconds more to engage
the safety system.
If the gas does not ignite after you press
and release the knob, repeat the same
procedure by keeping the knob pressed in
for 15 seconds.
DANGER: Release the button if
the burner is not ignited within 15
seconds.
Wait at least 1 minute before
trying again. There is the risk of
gas accumulation and explosion!
Page 19
As a counter measure
against blow out due to
fluid overflows at burners
or should the flame
extinguish for whatever
reason, the flow of gas to
the burner will
automatically be
terminated.
Advertisement
Table of Contents
