Product Overview; Front Panel; Rear Panel; Remote Control Unit (Rcu) - Qviart UNIC User Manual

2. Product Overview

2.1 Front Panel

1. Power button Switch between operation and standby modes.
Figure 2. Front Panel
2. Display It displays channel information. In standby mode it displays local time.

2.2 Rear Panel

1. LNB IN Connect the satellite antenna cable.
2. LOOP OUT Connect another receiver.
3. USB2.0 Connect USB disk.
4. RS232 Connect to the computer using a serial line.
5. COAXIAL Digital Audio output (Coaxial).
6. HDMI Connect to the TV using an HDMI cable.
7. CA CA interface.
8. TV scart Connect to the TV using a scart cable.
9. LAN Connect to the Ethernet using a
10. ON/OFF Power on/off.

2.3 Remote Control Unit (RCU)

You can control this receiver by this remote controller with full function.
1. POWER: power switch
2. MUTE: Mute audio.
3.AUDIO: Display the audio list.
4. PAUSE: Freeze the picture.
5. ZOOM: Picture zooming function.
6. INFO: Display the program information.
: Fast rewind.
: Fast forward.
7.
: Previous.
8.
I: Next.
9. I
11. : Play.
10.
12. : Stop/ Enter USB menu.
13. : Record.
Figure 3. Rear Panel
.
Network cable
3