Favorites / Radio Favorites; Sort Channels; User Channel List; Settings - Qviart UNIC User Manual

5.2 Favorites / Radio Favorites

1. Press the color button directly to add or remove the highlighted channels to or out of the corresponding
Menu->EDIT CHANNEL-> Favorites/Radio Favorites favorite group.
2 Press the EXIT button to exit the menu and save it.

5.3 Sort Channels

Highlight the option you want and press the OK button to sort the channel list. You can sort by Alphabet,
Transponder, FTA To CAS, Default, Favor, FTA To CAS+ Alphabet, Provider and Service ID.
Menu-> EDIT CHANNEL ->Sort Channels
User Channel List allows you to save or load all the data and settings.

5.4 User Channel List

1. Menu->EDIT CHANNEL -> User Channel List->Save User Data
2. Menu->EDIT CHANNEL -> User Channel List->Load User Data

6. Settings

Tip:
Input the default password.

6.1 System Settings

1. Menu Language: Set the menu language.
Menu->SETTINGS->System Settings
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4. Subtitle Language: Set the subtitle language.
5. EPG Language: Set the EPG language.
6. TXT Language: Set the TXT language.
7. Scart Output While the HDMI Mode is set to 576i or 480i
mode, you can change the scart output mode between CVBS and RGB mode.
8.Auto Channel Selection: If you set ON, it will play automatically the highlighted channel. If you set OFF, you
should press the OK button to play it.
9. Auto Exit CH List: If you set ON, it will disappear when you press OK on a Highlighted channel. If you set
OFF, the channel list will disappear.
10. Recall List: If you set ON, when you press Recall button of RCU you can get the recall list. If you set OFF,
you can go back to the last program you have selected.
11. Low Power Standby: If you set ON, when standby the power consumption is lower. If you set OFF, when
standby the power consumption is same as power on.
12.Front Panel Light: Set the brightness of the LED.
13.Network auto update: set network auto update or not.

6.2 OSD Setup

1. Menu Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of teletext.
Menu->SETTINGS->OSD Setup
3. Display Mode: Set the HD format between 1080p, 1080i,
720p, 576i or 576p.
4. TV Type: Set the TV Type on PAL/NTSC/Auto state.
5. Screen Mode: Set the display format according to the screen
ratio.
6. OSD Timeout: Set the display time of the program
9