Reference; Safety Precaution; Accessories - Qviart UNIC User Manual

Safety Precaution

This STB has been designed and manufactured to satisfy the international safety standards. Please read the
following safety precautions carefully before operating this receiver.
Before operating, please check the units operating voltage is 90~250V AC 50/60Hz.
Main Supply:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet
Overload:
hand as this may result in electric shock.
The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as
base, shall be placed on the apparatus. Liquid:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put the receiver on
Ventilation:
soft furnishings or carpets. Do not expose the receiver to direct light or do not place it near a heater or in
humid conditions. Do not stack other electronic equipment on top of the receiver.
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or mild solution of
Cleaning:
washing-up liquid (no solvents).
Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect it from LNB. Failure
Connection:
would possibly cause damage to the LNB.
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Location:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licensed service personnel
Uncover:
to repair the receiver, or contact your dealer.

1. Reference

1. Accessories

Users manual
Batteries
Remote Control Unit
Figure 1.Accessories
2