Loading Paper And Specialty Media - Lexmark XS795dte Quick Reference

> Paper Menu > Universal Setup > Units of Measure >
select a unit of measure
2
Touch Portrait Width or Portrait Height > select the width or
height > Submit
Loading the standard or optional
550‑sheet tray
The printer has one standard 550‑sheet tray (Tray 1), and may have
one or more optional 550‑sheet trays. All 550‑sheet trays support
the same paper sizes and types.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until
needed.
1
Pull the tray out.
Notice the size indicators on the bottom of the tray. Use these
indicators to help position the length and width guides.
2
Squeeze and then slide the width guide to the correct position
for the paper size you are loading.
3
Squeeze and then slide the length guide to the correct position
for the paper size you are loading.
Note: The length guide has a locking device. To unlock,
push the button on top of the length guide backward. To
lock, push the button forward when a length has been
selected.

Loading paper and specialty media

6
4
Flex the sheets back and forth to loosen them. Do not fold or
crease the paper. Straighten the edges on a level surface.
5
Load the paper stack with the recommended print side faceup.
Notes:
•
Place the print side facedown for duplex printing.
•
Place pre-punched paper with the holes toward the front
of the tray.
•
Place letterheads faceup with the header on the left side
of the tray.
•
Place letterheads facedown with the header on the right
side of the tray for duplex printing.
•
Make sure the paper is below the maximum fill line
located on the edge of the paper tray. Overloading the
tray can cause paper jams and possible printer damage.