To Turn Speed Control Off; To Set A Speed - Mercury Sable 1998 Owner's Manual

To turn speed control off

• Press OFF or
• Turn off the vehicle
ignition.
Once speed control is switched off, the previously
programmed set speed will be erased.

To set a speed

• Press SET ACC/SET
ACCEL. For speed
control to operate,
the speed control
must be ON and the
vehicle speed must
be greater than 48
km/h (30 mph).
If you drive up or down a steep hill, your vehicle
speed may vary momentarily slower or faster than
the set speed. This is normal.
Speed control cannot reduce the vehicle speed if it
increases above the set speed on a downhill. If your
vehicle speed is faster than the set speed while
driving on a downhill, you may want to shift to the
next lower gear or apply the brakes to reduce your
vehicle speed.
If your vehicle slows down more than 16 km/h (10
mph) below your set speed on an uphill, your speed
control will disengage. This is normal. Pressing
RES/RSM/RESUME will re-engage it.
Do not use the speed control in heavy traffic
or on roads that are winding, slippery, or
unpaved.
Controls and features
ON
OFF
RESUME
SET
ACCEL
COAST
29