Cleaning And Maintaining The Safety Belts; Cleaning The Built-In Child Seat - Mercury Sable 1998 Owner's Manual

Maintenance and care
contact with leather upholstery. If this occurs,
the leather should be cleaned immediately to
avoid permanent staining.
"Tanners Preserve Leather Cleaner" (product
number AS-300) is available from "First Brands" by
calling 1–800–726–1001. This product may also be
available at many local automotive after market
stores.
3M "Type T" Clean And Finish Scrubbing Pads (UPC
04011–01276) are available through your local 3M
distributor. Call 1–800–742–9649 for the nearest
distributor in your area.
PART NUMBER
(Obtain Locally)
(Obtain Locally)

Cleaning and maintaining the safety belts

Clean the safety belts with a mild soap solution
recommended for cleaning upholstery or carpets. Do
not bleach or dye the belts, because these actions
may weaken the belt webbing.
Check the safety belt system periodically to make
sure there are no nicks, wear or cuts. If your vehicle
has been involved in an accident, refer to the Safety
belt maintenance section in the Seating and safety
restraints chapter.
Cleaning the built-in child seat (if equipped)
Clean with mild soap and water. Do not use
household cleaning products because they may
weaken the safety belt webbing or damage the vinyl
parts of the seat.
The child seat liner is removable and may be
machine-washed and air dried.
172
PART NAME
Tanners Preserve Leather
Cleaner
3M Type T Clean and Finish
Scrubbing Pads