Speed Control; Brake System Warning; Engine Oil Pressure; Charging System - Mercury Sable 1998 Owner's Manual

Instrumentation
Speed control (if equipped)
This light comes on
CRUISE
when either the
ON
SET/ACCEL or
RESUME controls are
pressed. It turns off
when the speed control OFF control is pressed, the
brake is applied or the ignition is turned to the OFF
position.

Brake system warning

Momentarily illuminates
! P
when the ignition is
BRAKE
turned to the ON
position and the engine
is off. If brake warning lamp does not illuminate at
this time, seek service immediately. Also illuminates
when the parking brake is engaged. Illumination
after releasing the parking brake indicates low brake
fluid level and the brake system should be inspected
immediately.

Engine oil pressure

Illuminates when the
oil pressure falls below
the normal range. Stop
the vehicle as soon as
safely possible and switch off the engine
immediately. Check the oil level and add oil if
needed. Refer to Engine oil in the Maintenance
and Care chapter.
This lamp also illuminates when the ignition is
turned to ON and the engine is off.

Charging system

Illuminates when the
ignition is turned to
the ON position and
the engine is off. The
light also illuminates when the battery is not
10