Procedure 2A 2B 2C 2D 2E 2F
Ref. No. 2G
Assembly of Driving assembly.
2G
1. Close the housing A and B.
2. Tighten nine housing screws.
3. Apply the grease (DOUBREX / WEY002X8977) all around the anvil.
4. Assemble the slider to the clutch handle. Confirm it has its own direc-
tion.
5. Place the anvil into the clutch handle.
6. Apply the grease (DOUBREX / WEY002X8977) on the rear side of fix-
ation cover.
7. Attach the fixation cover.
8. Tighten four screws.
20