5 Disassembly and Assembly Instructions
5.1.
Disassembly Instructions
Ref. No. 1A
Procedure 1A
Procedure 1A 1B
Ref. No. 1B
Removal of the Housings.
1. Remove four screws where tightening fixation cover.
2. Pull off the fixing cover assembly.
3. Once removing the fixing cover, the driving shaft assembly may come
out.
Removal of bit holder.
(EYFLA4A and EYFLA5A only)
1. Remove C-type ring by the stop ring pliers.
2. Once removing C-type ring, thrust plate, bit holder spring, bit holder
and steel balls may come out.
12