Replacing The Feed Stitch Motor - Janome DC5100 Service Manual

SEWING MACHINE

REPLACING THE FEED STITCH MOTOR

TO REMOVE:
1. REMOVE THE FRONT COVER AND REAR COVERS (SEE PAGE 15 AND 16)
2. REMOVE THE SNAP RING (E-3)
3. REMOVE THE TWO SETSCREWS AND REMOVE THE FEED MOTOR.
CUT OFF THE CORD BINDER.
TO INSTALL:
TO INSTALL THE FEED MOTOR, FOLLOW THE ABOVE PROCEDURE IN
REVERSE.
NOTE:
ADJUST THE STRETCH STITCH PATTERNS (SEE PAGE 26).
BINDER
FEED MOTOR
ACCESS SETSCREW (B)
THROUGH THIS HOLE
SNAP RING
(E-3)
SETSCREW (B)
SETSCREW (A)
40
MODEL DC5100
SNAP RING (E-3)