Table of Contents
Advertisement
Appendix
Setting flash notification
Set the flash to blink when an alarm sounds or when you have notifications, such as
incoming calls and new messages.
On the Apps screen, tap Settings → Accessibility → Hearing, and then tap the Flash
notification switch to activate it.
Turning off all sounds
Set the device to mute all device sounds, such as media sounds, and the caller's voice
during a call.
On the Apps screen, tap Settings → Accessibility → Hearing, and then tap the Turn off
all sounds switch to activate it.
Caption settings
On the Apps screen, tap Settings → Accessibility → Hearing → WESTECH subtitles (CC)
or Google subtitles (CC), and then tap the switch to activate it.
Select an option for configuring the caption settings.
Adjusting the sound balance
Set the device to adjust the sound balance when using a
1
headset.
Connect a headset to the device and wear it.
2
On the Apps screen, tap Settings → Accessibility → Hearing.
3
Drag the adjustment bar under Left/right sound balance to the left or right and
adjust the sound balance.
Mono audio
Mono output combines stereo sound into one signal that is played through all headset
speakers. Use this if you have a hearing impairment or if a single earbud is more
convenient. On the Apps screen, tap Settings → Accessibility → Hearing, and then tap
the Mono audio switch to activate it.
132
Advertisement
Table of Contents
