WESTECH S7 User Manual page 135

Appendix
Using the cursor
On the assistive menu, tap Cursor. You can control the screen using small finger
movements on the touch area. Drag your finger on the touch area to move the cursor.
Also, tap the screen to select items under the cursor.
Use the following options:
• / : Scroll left or right on the screen.
• / : Scroll up or down the screen.
• : Magnify the area where the cursor is located.
• : Move the touch area to another location.
• : Close the touch area.
To change the touch area and cursor settings, open the Apps screen, tap Settings →
Accessibility → Dexterity and interaction → Assistant menu. Then, customise settings
in Touchpad and cursor settings.
Using enhanced assistive menus
Set the device to display enhanced assistive menus for selected apps.
On the Apps screen, tap Settings → Accessibility → Dexterity and interaction →
Assistant menu → Assistant plus, tap the switch to activate it, and then select apps.
Easy screen turn on
Turn on the screen by moving your hand above the sensor at the top of the device.
You can turn on the screen without pressing a key. When you use this feature, place
the device on a flat surface with the screen facing upwards or hold the device
securely to prevent it from moving.
On the Apps screen, tap Settings → Accessibility → Dexterity and interaction → Easy
screen turn on, and then tap the switch to activate it.
Tap and hold delay
Set the recognition time for tapping and holding the screen.
On the Apps screen, tap Settings → Accessibility → Dexterity and interaction → Tap
and hold delay, and then select an option.
134