Setting Up Your Audio Device - Creative SB1660 User Manual

Setting Up Your Audio Device

Step 1: Charging Your Sound Blaster FRee
Sound Blaster FRee comes with a built-in rechargeable battery that provides up to 10 hours of playtime
when fully charged. Charge the speaker before its first use by connecting it to a USB port on your
computer or to a 5V USB power adapter (not included). Each subsequent charge cycle takes around 3 to
4 hours.
Auto Power Off
To save power, the speaker automatically powers down after 15 minutes of inactivity.
Note:
Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage.
It is a good practice to keep the battery well charged.
Step 2: Turning On Sound Blaster FRee
Press the Power button to turn Sound Blaster FRee on. Press again to power it off.
Note:
If the speaker has not been paired with any devices previously, it will go into Bluetooth standby
mode. Otherwise, it will be automatically paired to previously paired devices.
Setting Up Your Audio Device 6