Advertisement
Make sure to disconnect the power plug from the outlet for maintenance.
Never connect or disconnect the power plug to/from the outlet with wet hands.
(Cause of electric shocks or injury)
Unplug
Never modify the appliance. Only a qualified technician may make repairs.
(Cause of fires, electric shocks, or injury)
Prohibited
When disconnecting a power plug or plug for the appliance, do not pull the cord, but
make sure to pull the plug to disconnect.
(Cause of electric shocks, short circuits or ignition)
Regularly clean the power plug and plug for the appliance, so that dust does not attach.
(Cause of electric shocks, short circuits or ignition)
After operation, keep the appliance in a place free from moisture. (Cause of damage to
the clipper if left in a bathroom due to condensation and rust occurring inside the clipper)
Make sure
Secure the appliance and power adaptor to prevent it from dropping in water.
The blade has been finished to high precision. Do not allow contact with hard
surfaces. If the edge becomes damaged or deformed, it can cause injuries to the skin.
Do not press cutting edge against skin too hard since this could result in skin injury.
Never touch the edge of the operating blade with bare hands. (Cause of injury to fingers)
Never use another power adaptor than the included power adaptor. Never charge
another product with the included power adaptor.
(Cause of short circuits or ignition due to abnormal heating)
Never charge or leave in humid or hot places. (inside a car in summer, etc)
Prohibited
(Failure to do so may result in malfunctions.)
The clippers are specifically designed for human hair cutting. Do not use your clippers
on cats, dogs, or other pets.
Disconnect the power plug from the outlet after charging. (Cause of injury
or burns, or electrical shocks/current leakage fire due to degradation of insulation)
Unplug
Safety precautions
1. Never use cream or gel shaving agents.
Cause of blade clogging or damage.
2. Do not charge each time you use the clipper.
Cause for loss of battery performance.
3. When the appliance has stopped moving, do not leave it with the switch turned on.
4. Never place or dry in places exposed to direct sunlight or high temperatures.
Cause of damage by deformation or discoloration.
5. Never wipe the appliance or power adaptor with alcohol, benzene, or thinner.
Cause of deformation or discoloration.
-2-
Advertisement
