Getting Started - Bush BR320DABC User Manual

Getting Started

Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
Main unit
Power adapter
Quick Start Guide
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
Where the radio will be exposed to direct sunlight.
Where the radio will be close to heat radiating sources.
Where the humidity is high and ventilation is poor.
Where it is dusty.
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and /or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit. Then
insert the power adapter into the mains socket. The unit will turn on.
Press /POWER button to switch unit standby.
To switch the unit off completely, unplug the power adapter from the mains socket.
Radio Auto-standby
To avoid unnecessary energy consumption, the radio will automatically go to standby after 10
minutes if the radio isn't playing any program/track.
Volume Control
Turn SCROLL/SELECT knob clockwise or anti-clockwise to increase or decrease volume level.
Note: the default function of SCROLL/SELECT knob is volume adjusting. If you have
pressed TUNE/VOL. button to activate tuning function of SCROLL/SELECT knob, you can
press TUNE/VOL. button a second time to activate volume adjusting function of
SCROLL/SELECT knob, or wait 10 seconds to resume tuning function to volume adjusting
function.
8
BR320DABC