Cd Player Operating Instructions - Audiovox Phase Linear PCD163 Owner's Manual

CD PLAYER OPERATING INSTRUCTIONS

Disc Slot
11
With the label surface facing up, fully insert a
compact disc into the slot (11) until the
mechanism engages and pulls the disc in. The
disc symbol ( and "S -- CDP" will appear on
)
the display. Play will begin from the first track
on the disc and the track number and elapsed
time of track play will appear on the display.
NOTE: The unit is designed for play of
standard 5" (12 cm.) compact discs only. Do
not attempt to use 3" (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
CD Play/Pause Selector
9
During disc play, press the (play/pause)
button (9) to pause the disc. When paused, "S -
- PAUSE" appears on the display, the disc
symbol flashes, and play is suspended. When
pressed again, playback resumes from the
point at which disc play was stopped.
Forward Track Selector
12
During disc play, the forward TRACK
(12) is used to quickly select the beginning of a
particular track in the forward direction. With
each press of the button, the next higher track
number will be selected as shown on the
display panel.
Backward Track Selector
13
During disc play, the backward TRACK
button (13) is used to quickly select the
beginning of a particular track in the backward
direction. With each press of the button, the
3a
1 5
BAND
LOUD
4
SEL/MENU
MODE
3b
7
10
next lower track number will be selected as
shown on the display panel.
button
, Cue/Review Functions
12 13
High-speed audible search to any section of the
disc can be made by the Cue and Review
functions. Press and hold the forward TRACK
button (12) to advance rapidly in the forward
direction or the backward TRACK
(13) to advance rapidly in the backward
direction.
11
MUTE TRACK
RPT SCN
15
14
9 13 12
PCD163
button
16
DISP
PCD163
6
AUX IN