Relish SBL-1801 User Manual page 7

Before commencing, ensure the power cord is unplugged and the control switch is in the OFF
position.
Ensure the motor unit is fitted onto the motor base correctly.
Insert the paddle drive shaft into the opening under the motor block and fit the paddle to the end of
the drive shaft
Remove the Cooling Vessel from the freezer once it is completely frozen and place on a flat stable
surface.
Place the motor unit above the Cooling Vessel so that all the locking tabs are aligned, then lower
down.
Pull the Coupling Latches outward to lock in place.
Plug the Ice-Cream Maker into a standard domestic power outlet and switch the outlet on.
Page 7 of 12