Using The Cli; Connect A Pc And Log In - Patton electronics Industrial Ethernet Extender with LCD Interface 3231 Cli Reference Manual

Model 3231 CLI Reference Guide

Using the CLI

The Model 3231 may be configured through the CLI, although basic settings should be configured through
the LCD menu on the unit.

Connect a PC and log in

Use an RS-232/Ethernet cable and DB9-RJ45 adapter to connect a PC's serial port to the 3231's Console port
(see figure 1).
CAUTION
PC with
terminal emulator
Serial port
1. Start a HyperTerminal session on the PC using the settings:
9600 bps, 8 data bits, no parity, 1 stop bit, no flow control
2. Log in to the 3231 using the factory-default login ( superuser ) and password ( superuser ):
Using the CLI
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
Figure 1. Connecting the 3231 to the PC's serial port
P o
w e
r
5 V
, 1
A
C o
n s
o le
E th
e rn
e t
R e
s e
t
Connect to Console port
L in
e
11