TRENDnet TPL-4052E Quick Installation Manual page 3

3. Optional Sync Button Procedure
Note: TRENDnet adapters auto-connect out of the box over a pre-encrypted Powerline signal. The following
recommended optional Sync Button Procedure changes the existing Powerline encryption key.
Push Sync button for
1
15 seconds to
generate new network
encryption key. All
LEDs will turn off and
then turn back on.
A
Internet
Push Sync button for
2
3 seconds, then
release. POWER
(PWR) LED will blink.
B
(On Adapters A & B)
3
POWERLINE (PL)
LED will turn solid
when connected.
3
Connect Additional Adapters using the Sync button
C
(On Adapter A or B) Push Sync
1
button for 3 seconds. Then
release. POWER (PWR) LED
will blink.
(On Adapter C) Push Sync
2
button for 3 seconds, then
release. POWER (PWR) LED
will blink.
(On All Adapters) POWERLINE
3
(PL) LED will turn solid when
connected.
4