18 Touring the camera
Charging the battery
You must charge the battery before using the camera for the first time.
1. Open the USB/HDMI port cover.
2. Connect the end of the smaller plug of the USB
cable to the camera.
3. Connect the other end of the USB cable to the AC
adapter.
4. Plug the AC adapter to a wall outlet to start
charging.
• Actual charging time depends on current battery capacity and charging conditions.
• You can also charge the battery via PC.
• Only use the supplied 5W adapter.
Installing and removing the battery
Use only the specified rechargeable lithium-ion battery for the camera, and
always turn off the camera before removing the battery.
To install the battery:
1. Slide the battery/card cover to the left
to release and open it.
2. Push and hold the battery latch to the left.
3. Fully insert the battery in the correct
direction by matching the polarity label on the
battery slot.
Downloaded From camera-usermanual.com BenQ Manuals