Basic Operation - BenQ GI User Manual

Basic operation

The procedure below is a general guideline for basic operation. It is particularly
useful if you are new to the camera.
1. Flip to open the LCD display and press
2. Set the mode dial to
page 24 for details.
Remember to follow the on-screen display or slide the Zoom lever to
instructions (wherever available). Next, press the corresponding buttons to access
and set more options. At any time, you can cancel the current operation by pressing
3. Adjust the LCD display position properly and compose the image.
Use the
Zoom
4. Press the shutter halfway to set automatic focus.
• Once the focus is set, the focus frame color will turn green (focused). If the
focus frame color is red and you press the shutter down, it might result in a
blurred photo.
5. Press the shutter down fully to capture the image.
6. To switch to Movie mode, press
Press again to stop video recording.
• During zoom-in/out, there is a separator in the zoom bar between
For best image quality, it is recommended to use optical zoom only by keeping the
magnification within
• Flash is automatically turned off in Movie mode.
• In Movie mode, the camera records both sound and video. The recording time is
continuous, but recording will stop once the memory card space is full or up to
25 minutes.
• At any time, you can press
Downloaded From camera-usermanual.com BenQ Manuals
or other desired shooting mode. See
to return to your previous step.
lever to zoom-in/zoom-out on the subject.
Optical Zoom
and the separator.
to turn the power on.
. The video recording automatically starts.
Digital Zoom
to turn off the camera.
Operating the camera 31
"Mode dial" on
for
and .