Dell SCv2080 Getting Started Manual page 21

LED Indicators
Drawer
Disk Drive In Carrier
(DDIC)
6 Gb SAS IO module
Cooling module
Power Supply Unit (PSU) •
Power Supplies
AC power supply (per power supply)
Wattage
Voltage
Heat dissipation
Input frequency
Max input power
Input current
Maximum inrush current Under typical line conditions and over the entire system ambient operating
Available Hard Drive Power (per Slot)
Supported hard drive
power consumption
(continuous)
I/O Card Power (per Slot)
Maximum power
consumed by I/O Card
Maximum available
power
• One single-color LED indicator for drawer 2 fault status
• One single-color LED indicator for sideplane card and power status
• One single-color LED indicator for drawer fault status
• One single-color LED indicator for logical fault status
• One single-color LED indicator for cable fault status
• Six single-color LED indicators for data transfer status
One single-color LED for drive fault status
14 one-color LED status indicators, four each for the three SAS ports and two
for the module status
• One single-color LED indicator for module status
• One single-color LED indicator for battery fault status (not currently used)
• One single-color LED indicator for fan fault status
One single-color LED indicator for PSU fault status
• One single-color LED indicator for AC power fault status
• One single-color LED indicator for power status
2.8 kW
200–240 VAC (16 A)
191-147 W
50/60 Hz
1791 VA
7.4 A@241 VAC
range, the inrush current may reach 55 A per power supply for 10 ms or less
Up to 1.16 A at +5 V
Up to 1.6 A at +12 V
11 W at +12 V
100 W at +12 V
21