Specifications; Interfaces/Connectors; Interface Speed; Transmission Mode - Patton electronics 2300M User Manual

APPENDIX A

SPECIFICATIONS

A.1 INTERFACES/CONNECTORS
• Twisted-Pair/Copper Ethernet: Shielded RJ-45 Jack
• Fiber Optic Ethernet: Dual ST or SC Connectors
A.2 INTERFACE SPEED
• 2300M: 100 Mbps
• 2310M: 10 Mbps
• 2311M: Auto-Negotiating 10 or 100 Mbps
• 2312M: Auto-Negotiating 10 or 100 Mbps
A.3 TRANSMISSION MODE
Full or Half-Duplex Operating Modes (Auto-sensing)
A.4 TWISTED-PAIR/COPPER CABLE TYPE*
Category 5 or better recommended
A.5 FIBER CABLE TYPE*
Recommended: 62.5/125 µm multi-mode fiber
Optional:
• 100/140 µm multi-mode fiber
• 85/125 µm multi-mode fiber
• 50/125 µm multi-mode fiber

1.6 FIBER WAVELENGTH

• 2300M & 2312M: 1300nm
• 2310M & 2311M: 850nm
* Physical characteristics of the twisted-pair/copper and fiber
optic cable must meet or exceed IEEE 802.3 specifications.
14