Linksys
LED Indicators
LED Name
Color
Description
On: Power On
System
Green
Blinking: System booting up
On: System not ready
DIAG
Amber
Off: System ready
Blinking: System is on self-test
Amber On: 10/100M link
Amber Blinking: 10/100M activity
WAN
Green/ Amber
Green On: Gigabit link
Green Blinking: Gigabit activity
Amber On: 10/100M link
Amber Blinking: 10/100M activity
WAN/DMZ
Green/ Amber
Green On: Gigabit link
Green Blinking: Gigabit activity
On: Designated VPN tunnel up
VPN
Green
Off: Designated VPN tunnel down
Amber On: 10/100M link
1~4
Amber Blinking: 10/100M activity
Green/ Amber
Ethernet
Green On: Gigabit link
Green Blinking: Gigabit activity
Reset
Action
Description
Warm start
Press Reset Button For
DIAG indicator: Diag LED flashing slowly
5 Secs
Factory default
Press Reset Button
DIAG indicator: Diag LED flashing quickly
Longer than 10 Secs
Placement Tips
•
Do not place anything on top of the router . The router could be damaged
by excessive weight .
•
Do not obstruct heat dissipation holes on the sides of the router .
•
Do not expose to direct sunlight or other heat source . Keep area around
router adequately ventilated .
•
Place the router on a flat surface .
Wall Mounting Tips
The router has two wall-mount slots on its bottom panel . When mounting the
router on the wall, please ensure that the heat dissipation holes are facing
sideways as shown in the following picture for safety reasons . Linksys is not
responsible for damages incurred by insecure wall-mounting hardware .
Hardware Installation
2