Care And Maintenance - Haier AD242ALEAA Operation Manual And Installation Manual

Duct type 20pa indoor unit
Hide thumbs


Table of Contents

Care and Maintenance

Turn off the power supply switch.
Do not open the inlet grill until fan stops completely.
Fan will continue rotating for a while by the law of inertia after operation is being stopped.
Cleaning the air filter
1.Clean the air filter by lightly tapping it or with the cleaner. It is more effective to clean
the air filter with water.
If the air filter is very dirty, dissolve neutral detergent in the lukewarm water (approx. 30 C),
rinse the air filter in the water, and thoroughly wash off the detergent on the air filter
in the plain water.
2.After drying the air filter, set it up on the air conditioner.
Do not dry the air filter with fire.
Do not run the air conditioner without the air filter.
Care and Cleaning of the unit
Clean with soft and dry cloth.
If it is very dirty, dissolve neutral detergent in the lukewarm water and make the cloth wet with the water. After wiping,
clean off the detergent using clean water.
Post-Season Care
Operate the unit with FAN mode on a fair day for about half a day to dry the inside of the unit well.
Stop operation and turn off the power supply switch. Electric power is consumed even if the air conditioner is in stop.
Clean the air filter and set it in the place.
Pre-Season Care
See that there are no obstacles blocking the air inlet and air outlet of both indoor and outdoor units.
Make sure that the air filter is not dirty.
Turn on
the power supply switch 12 hours before starting run.
Points to observe
Do not touch with wet hand.
Do not use hot water or
Do not
Tooth powder


Table of Contents

  Related Manuals for Haier AD242ALEAA

This manual is also suitable for: