Canon iRC3380 User Manual page 52

IMPORTANT
If the main power indicator on the control panel does not light even though the main power switch is ON,
be sure to check the breaker to see if it is OFF. (See "When the Power Does Not Turn ON," in the
Reference Guide.)
4
The screens on the right are displayed
while the system software is loading.
1
● If login authentication by a login service (SDL
(Simple Device Login) or SSO (Single
Sign-on)) is not set, and an application other
than MEAP is selected as the initial function in
Common Settings (from the Additional Func-
tions screen):
❑
The Start Up screen is displayed until the machine is
ready to scan.
If a message is displayed on the touch panel display,
proceed to step 5.
❑
The screen on the right is displayed when the
machine is ready to scan.
The machine is ready to scan in approximately 30
seconds (for the iR C3380/iR C2880) or 38 seconds
(for the iR C3380i/iR C2880i) after the screen on the
right appears.
1-22
Main Power and Control Panel Power