Advertisement
TZM443
7.2 Video and audio switching commands.
The host must be sent with the following sequence:
BXXYY
followed by CR
Please note: if YY is 00
Example: To switch video and audio input No.3 to output No.4, it is necessary to send the
following characters in line: 42 30 34 30 33 0D
It is possible to direct a video input and an audio input coming from different sources towards a
video and audio output. The sequence of the characters will be:
BXXYYZZ followed by CR
Please note: if YY is 00
If ZZ is 00
Example: to switch the video of input 1 and the audio of input 3 to output 4, it is necessary to
send the following characters in line: 42 30 34 30 31 30 33 0D
The TZM443 matrix will respond:
ACK
(Hex 06) if the control has been executed correctly
NACK (Hex 15) if it has found incorrect transmission errors
7.3 Video switching command.
The host must be sent with the following sequence:
VXXYY
followed by CR
Please note: if YY is 00
Example: To bring video output 2 to high impedance, it is necessary to send the following
characters in line: 56 30 32 30 30 0D
The TZM443 matrix will respond:
ACK
(Hex 06)
if the control has been executed correctly
NACK (Hex 15) if it has found incorrect transmission errors
ELPRO Video Labs s.r.l.
Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY
Tel.+39 0119348778 – Fax +39 0119348779
where: B is the character Hex 42
XX is the output
YY is the video and audio input (from 01 to 04)
the video output will be brought to high impedance
the audio output will be brought to 0 Volt
where: B is the character Hex 42
XX is the output
YY is the video input
ZZ is the audio input
the video output will be brought to high impedance
the audio output will be brought to 0 Volt
where: V is the character Hex 56
XX is the output
YY is the video input
the video output will be brought to high impedance
4x4 HIGH RES. & AUDIO MATRIX
(from 01 to 04)
(from 01 to 04)
(from 01 to 04)
(from 01 to 04)
(from 01 to 04)
(from 01 to 04)
10
Advertisement
