Cleaning And Maintenance - Hotpoint Ariston LI E75 AA0 Operating Instruction

Ironing without steam (D)
Select the recommended ironing temperature using
the temperature control (10) - see step B, chapter
"Using the Compact Generator" and paragraph
"Selecting the temperature".
Ironing with steam (E)
1. Make sure that the water level in the reservoir is
higher than 1/4.
2. Select the recommended ironing temperature
using the temperature control (10) - see step
B, chapter "Using the Compact Generator" and
paragraph "Selecting the temperature".
3. Press the steam button (2) to use the steam
ironing function. We recommend using the
steam button function when the temperature is
higher than ●●●.
Wait for the temperature indicator light to
go off before pressing the steam button.
Ironing with shot of steam (F)
The shot-of-steam function allows you to eliminate
persistent creases. You can use this function both in
no-steam and steam ironing mode.
1. Make sure that the water level in the reservoir is
higher than 1/4.
2. Select the recommended ironing temperature
using the temperature control (10) - see step
B, chapter "Using the Compact Generator" and
paragraph "Selecting the temperature".
3. Press the shot-of-steam button (1) to get an
extra steam flow when ironing.
Wait for the temperature indicator light to
go off before pressing the shot-of-steam
button.
FEATURES
Vertical steam function (G)
The vertical steam function is useful to eliminate any
creases from hanging garments, curtains etc. To use
this function just place the Compact Generator in
a vertical position. All the functions of the Compact
Generator will remain unchanged in this position -
refer to chapter "Using the iron".
Automatic switch-off function (H)
The automatic switch-off function ensures total safety.
This function automatically switches off the Compact
Generator when it is not used for 5 minutes.
If you leave the Compact Generator unattended, a
buzzer will sound to inform you that the automatic
switch-off function is active. Simply move the iron to
switch it back on.
Wait until the temperature indicator light
goes off before starting ironing again.

CLEANING AND MAINTENANCE

After use
1. Disconnect the iron plug from the electrical
socket and let the Compact Generator cool
down.
2. Empty the water reservoir (6).
3. Wind the cord around the cable winder (7) and
store the Compact Generator using the pad
supplied in a dry safe place.
Cleaning the iron (I)
Never use aggressive and/or abrasive
products to clean the plastic parts and the
iron soleplate.
1. Disconnect the iron plug from the electrical
socket and let the Compact Generator cool
down.
2. Clean the upper section of the Compact
Generator with a slightly dampened soft cloth;
then wipe it dry.
3. For routine cleaning and/or the removal of stains
or other residues deposited on the soleplate, use
a damp soft cloth and dry.
4. Use a damp cotton tip to remove any scale in the
steam holes that may impair the performance of
your Compact Generator.
In order to keep the soleplate perfectly
smooth and polished, avoid any contact
with metal objects and do not iron sharp objects
such as buttons, studs and hinges - they may
scratch the plate.
5. To clean the Pure Water filter (11), open the filler
hole and remove the Pure Water filter. Wash the
filter under running water, taking care that the jet
of water is not too strong, and then re-place it.
6. Regularly rinse the reservoir with clean water.
After cleaning, always empty the water reservoir.
it en
21