Display Settings - Kenwood KDC-BT368U Instruction Manual

AUDIO SETTINGS
CAR SETTINGS Identify your car type and rear speaker location in order to make the adjustment for [DTA
SETTINGS].
CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/MINIVAN(LONG): Selects the type of
vehicle. ; OFF: Not compensating.
R-SP LOCATION Selects the location of the rear speakers in your vehicle to calculate the furthest distance from
the listening position selected (reference point).
• DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected as [OFF], [COMPACT],
[FULL SIZE CAR], [WAGON] or [SUV].
• 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is selected as [MINIVAN] or
[MINIVAN(LONG)].
• [SUB-W LEVEL]/[SUBWOOFER] of [SPEAKER SIZE]/[SUBWOOFER LPF] of [X ' OVER] is selectable only if
[SUBWOOFER SET] is set to [ON].
• [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other than [NONE] is
selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
• You can only adjust the [DISTANCE] and [GAIN] of [DTA SETTINGS] for [REAR LEFT], [REAR RIGHT] and
[SUBWOOFER] if a setting other than [NONE] is selected for [REAR] or [SUBWOOFER] of [SPEAKER SIZE].
• [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] is selected for [REAR] or
[SUBWOOFER] of [SPEAKER SIZE].
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the currently set listening
position to every speaker, the delay time will be automatically
computed and set.
1 Determine the center of the currently set listening position as the
reference point.
2 Measure the distances from the reference point to the speakers.
3 Calculate the differences between the distance of the furthest
speaker (rear speaker) and other speakers.
4 Set the [DISTANCE] calculated in step
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening position

DISPLAY SETTINGS

Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the
dimmer.
• If you have set [DIMMER TIME] ( 22), it will be canceled
once you press and hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 22), then
press the knob.
3
Repeat step
activated or follow the instructions stated on the
selected item.
4
Press and hold
To return to the previous setting item, press
3
for individual speakers.
2
until the desired item is selected/
to exit.
ENGLISH
.
21