Kenwood KDC-BT368U Instruction Manual page 17

BLUETOOTH®
Once pairing is completed, Bluetooth connection is established automatically. "BT1" and/
or "BT2" indicator on the faceplate lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit
even if you reset the unit. To delete the paired device,
• A maximum of two Bluetooth phones and one Bluetooth audio device can be
connected at any time.
• Some Bluetooth devices may not automatically connect to the unit after pairing.
Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
Auto Pairing
When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing
request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is turned on.
– [AUTO PAIRING] is set to [ON]. ( 16)
– KENWOOD MUSIC PLAY application is installed on the Android device ( 7) and
[BROWSE MODE] is selected ( 8).
16, [DEVICE DELETE].
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER]
is set to a selected time. ( 15)
During a call:
• The display illuminates according to the settings made
for [DISPLAY] ( 22) and ZONE 2 illuminates in green
color.
• If you turn off the unit or detach the faceplate, the
Bluetooth connection is disconnected.
The following operations ( 14) may differ or not available
depending on the connected phone.
13
ENGLISH