Kenwood KDC-BT368U Instruction Manual page 18

BLUETOOTH®
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
14
ENGLISH
On the faceplate
Press or the volume knob
or one of the number buttons
(1 to 6).
Press .
Press .
Press .
Press .
Press .
Press .
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
Press during a call.
• Operations may vary
according to the connected
Bluetooth device.
Improve the voice quality
On the remote control
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
Press . 2
Turn the volume knob to select an item (see the
following table), then press the knob.
3
Repeat step
activated.
Press .
4
Press and hold
Press .
To return to the previous setting item, press
Press .
MIC GAIN
NR LEVEL
Press .
ECHO CANCEL
Press .
Press .
Make the settings for receiving a call
1 Press
2 Turn the volume knob to select an item ( 15), then
press the knob.
( Not available )
3 Repeat step
activated.
4 Press and hold
To return to the previous setting item, press
( Not available )
2
until the desired item is selected or
to exit.
LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity
of the microphone increases as the number increased.
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise
reduction level until the least noise is being heard
during a phone conversation.
LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo
cancellation delay time until the least echo is being
heard during a phone conversation.
to enter Bluetooth mode.
2 until the desired item is selected or
to exit.
.
Default: XX
.