Checking/Replacing Battery Of Remote Control - Num'axes CANICOM 300 User Manual

Checking/replacing battery of remote control

Checking/replacing battery of remote control


Performance (radio range) of the remote control may deteriorate as battery becomes weak. Be
Performance (radio range) of the remote control may deteriorate as battery becomes weak. Be
prepared to replace the battery.
prepared to replace the battery.
To check the condition of the battery, turn on the remote control and look at the battery level indicator
To check the condition of the battery, turn on the remote control and look at the battery level indicator
on the LCD screen. The symbols which appear indicate the following:
on the LCD screen. The symbols which appear indicate the following:
Battery fully charged.
Weak battery: prepare to replace the battery.
Dead battery: your CANICOM 300 functions in safety mode and the system locks up.
The battery must be replaced.
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new
purchased product. Other brands of batteries may not operate, or may not be completely compatible
purchased product. Other brands of batteries may not operate, or may not be completely compatible
with your product.
with your product.
You can purchase the suitable batteries from NUM'AXES or from your distributor.
You can purchase the suitable batteries from NUM'AXES or from your distributor.
Remove the old battery and replace it with a new one :
Remove the old battery and replace it with a new one :
- On the back of the remote control, unscrew the screw and remove the battery cover.
- On the back of the remote control, unscrew the screw and remove the battery cover.
- Remove the old battery.
- Remove the old battery.
- Insert the new battery (3-V lithium CR 2) paying attention to follow polarity indicated on the battery
- Insert the new battery (3-V lithium CR 2) paying attention to follow polarity indicated on the battery
housing. (ref. Diagram 6).
housing (ref. Diagram 6).
- Put the battery cover back in place.
- Put the battery cover back in place.
- Retighten the screw.
- Retighten the screw.
- Check the remote control operates correctly.
- Check the remote control operates correctly.
Make sure the polarity is correct
Diagram. 6
Replacing battery
of CANICOM 300
WARNING
Gb - 26
Gb - 26