Define User Number; Add User Number; Delete User Number; Network Parameter Settings - SimPal G4 User Manual

The original password is 1234.


3.3 Define User number

User number has the authority to listen in on the camera, capture images, and
receive notification when the integrated infrared body detector be triggered. User's
mobile number and emails are set by the Master number. The User should remember
and safeguard the camera's SIM number.

3.3.1 Add User number

Master user sends following SMS message in order to:
Add User number:
Up to 4 user numbers can be stored on one camera.

Add User email address:
Up to 4 user email email can be stored on one camera.


3.3.2 Delete User number

Master user sends following SMS message in order to:
Delete user number:
Delete user e-mail:
Delete all user numbers and Emails:

3.4 Network parameter settings

3.4.1 MMS parameters setting

Camera already preset most operator MMS settings on the firmware. Users needn't to
setup the MMS parameters. But if the GSM operator changes the MMS parameters or
the local MMS settings do not preset on the firmware, users will receive SMS when
they request MMS images: Sorry, the network is busy, MMS sending failed. Master
number can setup the MMS parameters manually by following two methods.
Method 1:
User sends following SMS to:
Auto select MMS setting from firmware:
Manual select MMS settings from firmware:
Network code is the MCC+MNC of this operator, such as 46001. If do not included
network code in this command, only send #54#, it will auto configure the setting
according SIM card MCC+MNC.
Method 2:
14
SimPal-G4 3G Security Camera User Manual
#07# User-mobile-number #
#07# User-e-mail #
#27# user-mobile-number #
#27# user- e-mail #
www.microdata.fi support@microdata.fi
#27#
#54# (8)
#54#Network code#
09 - 42474920
(4)
(5)
(6)
(7)
(9)