1. Manuals
  2. Brands
  3. SimPal Manuals
  4. Security Camera
  5. G4
  6. User manual

SimPal G4 User Manual

3g security camera
Hide thumbs Also See for G4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
SimPal Series
3G Security Camera

User Manual

Manual version 1.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G4 and is the answer not in the manual?

Questions and answers

Related Manuals for SimPal G4

Summary of Contents for SimPal G4

  • Page 1: User Manual

    SimPal Series 3G Security Camera User Manual Manual version 1.3...
  • Page 2 (MMS) or e-mail via cellular network. You can control and change the camera settings via SMS command. The MMS sent by the SimPal camera can be viewed on your mobile phone. You also can check the images in your mobile phone email App.

  • Page 3: Table Of Contents

    4.2.1 Capture images to mobile phone .................... 17 4.2.2 Capture images to user’s E-mail address ................17 4.2.3 Schedule send images ......................18 4.3 Arming or disarming SimPal camera ....................19 4.3.1 Arming SimPal camera ......................19 4.3.2 Camera alarm .......................... 19 4.3.3 Disarming SimPal camera ......................
  • Page 4 SimPal-G4 3G SECURITY CAMERA USER MANUAL 4.11 SMS notification upon alarm triggering ..................20 4.12 Images notification upon alarm triggering ................... 21 4.13 Call notification upon alarm triggering ..................21 4.14 SMS notification to family number ....................21 4.15 MMS Images notification to family number ................. 21 4.16 Email notification to family number .....................

  • Page 5: For Your Safety

    SimPal-G4 3G SECURITY CAMERA USER MANUAL 1. Purchase a 3G SIM card (mobile phone card) from network service operator and install it in the camera. This SIM card number is referred as SimPal camera number on this brochure. 2. The user needs to activate the MMS, Cellular data functions and Caller ID Presentation function of SIM card, and deactivate PIN code of the SIM.

  • Page 6: Chapter 1 Structure Instruction

    SimPal-G4 3G SECURITY CAMERA USER MANUAL The contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, either expressed or implied, including, but not limited to the accuracy, reliability or contents of this document. We reserve the right to revise this document or withdraw it at any time without prior notice.

  • Page 7: Light Indicator

    Sensor alarm, infrared body detector alarm. Constant Light Not installed SIM card, or the Security camera damaged. Constant Light Armed status. Arming command received. SimPal camera will enter arming Green Flash twice per 2 mode after 20 seconds. seconds The camera is at the alarm-suspension situation.
  • Page 8 SimPal-G4 3G SECURITY CAMERA USER MANUAL Flash slowly Disarmed status. Flash quickly Processing data. Light 2 seconds Successfully reset factory setting, or loading sensor. Note: Slow flash 1 time per second, quick flash 2 times per second.

  • Page 9: Chapter 2 Installation

    Antenna Connector on the camera. Installing the SIM card • Remove the Battery Compartment Cover from the rare of SimPal camera and a SIM card holder will be found. • Open the SIM card holder. • Insert the SIM card carefully into the card holder. Make sure that the golden connectors on the card are facing downwards.

  • Page 10: The Power Adapter And Battery

    SimPal-G4 3G SECURITY CAMERA USER MANUAL 2.2 The power adapter and battery Connecting to the power adapter • Connect the plug to the power interface of the SimPal camera and then connect the adapter to an AC power. The built-in rechargeable Lithium battery •...

  • Page 11: Install The Host Mounting Bracket

    SimPal Fold-out stand camera SimPal camera can be mounted on a wall (vertically with the screws) or put down on any suitable horizontal surface. How to choose the Installing place: In order to capture better image quality, avoid any areas where bright light will be irradiated directly into the lens of the camera on the camera.

  • Page 12: Chapter 3 Define The User And Basic Settings

    Set Security camera by SMS command Note • Any MMS enabled mobile phone can receive the images captured by SimPal camera by sending SMS command with password. • Any SMS enabled mobile phone can control SimPal camera with the password...

  • Page 13: Setup Master Number

    3.2.1 Add a master number to the camera If SimPal camera is being used for the first time, or SimPal camera has been reset, the master user’s number must be programmed into the camera, in order to ensure activation. The...

  • Page 14: Define Family User

    SimPal-G4 3G SECURITY CAMERA USER MANUAL Master user sends following SMS message to: Change the password: #18#oldpassword#newpassword# l The password is a four digit number. l The original password is 1234. 3.3 Define family user Family users have the authority to listen in on the camera, receive images, and receive notification when the integrated infrared body detector be triggered.

  • Page 15: Cellular Data Parameters Setting

    SimPal-G4 3G SECURITY CAMERA USER MANUAL Six MMS parameters be requested on the camera. Master send following SMS commands to camera. Configure MMS parameter settings: #25#MMSC#Proxy IP#WAPProxyPort#HTTPProxyPort#APN#Username#Pssaword# The command included parameters: l MMSC means MMS center, for example: http://mmsc. l Proxy IP: The IP address for MMS, For example: 139.7.29.17 l WAP Proxy Port: port number for WAP1.2, for example:9201...

  • Page 16: Email Parameters Setting

    SimPal-G4 3G SECURITY CAMERA USER MANUAL 3.4.3 Email parameters setting The SimPal support SMTP protocol sending images email, user need to configure the SMTP parameters before using this service. It need to activate POP3/SMTP functions on email website settings. 3.4.4Configure email SMTP parameters...

  • Page 17: 5Configure Receiving Email Address

    4.1 Call the camera to listen in Master and family user calls SimPal camera after which it will answer automatically. The user can then listen in the live audio in the monitoring area. Only one line can be connected to SimPal camera at a time.

  • Page 18: Schedule Send Images

    SimPal-G4 3G SECURITY CAMERA USER MANUAL Capture images and send to user email: #05#quantity# (20) 4.2.3 Schedule send images Master sends following SMS message in order to: Set schedule to auto-send images parameters: #43#Mode#WorkDay#StartTime#EndTime#IntervelTime#. (21) l Mode: the parameter is 0 and 1, 0 means sending images to email, 1 means sending images by MMS.

  • Page 19: Arming Or Disarming Simpal Camera

    4.3 Arming or disarming SimPal camera 4.3.1 Arming SimPal camera l When user arm the SimPal camera, the built-in infrared body detector (PIR) will start working and detecting body heat. SimPal camera will automatically send alarm message or making a phone call once it be triggered.

  • Page 20: Image Size Setting

    For example: 0000 means time 00:00(hh:mm), 2359 means time 23:59(hh:mm). the EndTime can be earlier than StartTime, it will set as end of next day. 4.8 Image size setting The master or family user sends following SMS message to SimPal camera in order to: Change the image size: #22#value# (41) •...

  • Page 21: Images Notification Upon Alarm Triggering

    #13#1# (51) SimPal camera will call the master and the family user’s numbers for not more than 3 times. If it is still no one answers the call, SimPal camera will then exit dialing mode automatically. 4.14 SMS notification to family number...

  • Page 22: Turn On/Off Night Vision Led Lights

    Disabled Mains power change alert: #35#0# (62) 4.20 Check status The user sends following SMS message in order to: Check the present settings and work status of SimPal camera: • For master and family users: #10# (63) Check firmware, IMEI and GSM signal of SimPal camera:...

  • Page 23: Chapter 5 General Troubleshooting

    • Keep pressing the setting button for 5 seconds, camera will beep ring.. • Then the camera reset to factory setting successfully. Method 2: Reset via SMS command The user sends following SMS message to SimPal camera in order to: Reset the camera: #19#password#...

  • Page 24: Appendix: Sms Commands List

    SimPal-G4 3G SECURITY CAMERA USER MANUAL Store temperature -20℃～+60℃ Relative humidity 10-90%，without condensation Working band GSM 850/900/1800/1900MHZ WCDMA /HSUPA 2100MHz (850/1900 Mhz Optional) Image format JPEG Image resolution 320×240, 640×480, 1280×768 Camera pixel 5.0 Megal pixel Camera Shooting angel 68 degree Best shooting distance at night ≤3meters...
  • Page 25 SimPal-G4 3G SECURITY CAMERA USER MANUAL Category Function Command User Family Capture one image and send to Master (17) #03# the user mobile Family Capture images and send to Master (18) #03#ImageQuantity# the user mobile Family Capturing images Capture image and send to...
  • Page 26 SimPal-G4 3G SECURITY CAMERA USER MANUAL Category Function Command User SMS notification upon alarm (46) #11#1# Master (Default) MMS notification upon alarm (47) #11#1# Master Email notification upon alarm (48) #12#2# Master Without image notification (49) #12#0# Master upon alarm...

Table of Contents