Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for SimPal G4
Summary of Contents for SimPal G4
-
Page 1: User Manual
SimPal-G4 3G Security Camera User Manual Manual version 1.2... - Page 2 (MMS) or e-mail via cellular network. You can control and change the camera settings via SMS command. The MMS sent by the SimPal camera can be viewed on your mobile phone. You also can check the images in your mobile phone email App.
-
Page 3: Table Of Contents
SimPal-G4 3G Security Camera User Manual CONTENTS For your safety..............................5 Exception clause............................5 Chapter 1 Structure instruction..........................6 1.1 Package contents.............................6 1.2 Products instructions..........................6 1.4 Light indicator ............................7 Chapter 2 Installation............................9 2.1 The antenna, temp sensor, SIM card and power adapter................9 2.2 The power adapter and battery......................10 2.3 Install the host mounting bracket......................11... - Page 4 SimPal-G4 3G Security Camera User Manual 4.14 SMS notification to family number....................23 4.15 Images notification to family number....................23 4.16 Turn on/off LED indicator on the camera..................24 4.17 Turn on/off night vision LED lights....................24 4.18 Mains power change alert........................24 4.19 Unknown SMS forward........................24 4.20 Check status............................24...
-
Page 5: For Your Safety
SimPal-G4 3G Security Camera User Manual 1. Purchase a 3G SIM card (mobile phone card) from network service operator and install it in the camera. This SIM card number is referred as SimPal camera number on this brochure. 2. The user needs to activate the MMS, Cellular data functions and Caller ID Presentation function of SIM card, and deactivate PIN code of the SIM. -
Page 6: Chapter 1 Structure Instruction
SimPal-G4 3G Security Camera User Manual Chapter 1 Structure instruction 1.1 Package contents Remote camera 1 unit Power adapter(12V/1A) 1 pcs GSM antenna 1 pcs Temperature sensor 1 pcs User manual 1 pcs Mounting bracket 1 set Remote control and wireless sensor Optional 1.2 Products instructions... -
Page 7: Light Indicator
Flash slowly Searching the network. Flash quickly Sensor alarm, infrared body detector alarm. Constant Light Not installed SIM card, or the remote camera damaged. Green Constant Light Armed status. Flash twice per 2 Arming command received. SimPal camera will enter arming... - Page 8 SimPal-G4 3G Security Camera User Manual mode after 20 seconds. seconds The camera is at the alarm-suspension situation. Flash slowly Disarmed status. Flash quickly Processing data. Light 2 seconds Successfully reset factory setting, or loading sensor. Orange Flash Loading remote control status.
-
Page 9: Chapter 2 Installation
Mount the supplied antenna into the Antenna Connector on the camera. Installing the SIM card Remove the Battery Compartment Cover from the rare of SimPal camera and a SIM card holder will be found. Open the SIM card holder. -
Page 10: The Power Adapter And Battery
Get back the Battery Compartment Cover of SimPal camera. 2.2 The power adapter and battery Connecting to the power adapter Connect the plug to the power interface of the SimPal camera and then connect the adapter to an AC power. The built-in rechargeable Lithium battery ... -
Page 11: Install The Host Mounting Bracket
The camera has a bottom bracket by which it can stand on the table. 2.4 Mounting the SimPal camera SimPal camera can be mounted on a wall (vertically with the screws) or put down on any suitable horizontal surface. How to choose the Installing place: In order to capture better image quality, avoid any areas where bright light will be ... -
Page 12: Power On/ Off
Get images by sending SMS command Get images by E-mail Set remote camera by SMS command Add, modify or delete sensor Note Any MMS enabled mobile phone can receive the images captured by SimPal camera by sending SMS command with password. -
Page 13: Setup Master Number
3.2.1 Add a master number to the camera If SimPal camera is being used for the first time, or SimPal camera has been reset, the master user’s number must be programmed into the camera, in order to ensure activation. The... -
Page 14: Define Family User
SimPal-G4 3G Security Camera User Manual Change the password: #18# oldpassword # newpassword # The password is a four digit number. The original password is 1234. 3.3 Define family user Family users have the authority to listen in on the camera, capture images, and receive notification when the integrated infrared body detector be triggered. -
Page 15: Cellular Data Parameters Setting
SimPal-G4 3G Security Camera User Manual code in this command, only send #54#, it will auto configure the setting according SIM card MCC+MNC. Method 2: Six MMS parameters be requested on the camera. Master send following SMS commands to camera. -
Page 16: Email Parameters Setting
#24# (13) 3.4.3 Email parameters setting The SimPal camera support SMTP protocol sending images email, user need to configure the SMTP parameters before using this service. It needs to activate POP3/SMTP functions on email website settings. 3.4.4Configure email SMTP parameters... -
Page 17: 5Configure Receiving Email Address
4.1 Call the camera to listen in Master and family user calls SimPal camera after which it will answer automatically. The user can then listen in the live audio in the monitoring area. Only one line can be connected to SimPal camera at a time. -
Page 18: Schedule Send Images
Deactivate schedule send images: #06#0# (24) 4.3 Arming or disarming SimPal camera 4.3.1 Arming SimPal camera When user arm the SimPal camera, the built-in infrared body detector (PIR) will start working and detecting body heat. SimPal camera will automatically send alarm... -
Page 19: Camera Alarm
SimPal-G4 3G Security Camera User Manual message or making a phone call once it be triggered. SimPal camera has 30 seconds alarm-suspension period after it be armed. The user can leave the camera place during this time to avoid misalarm. -
Page 20: Remote Control
4.5 Remote control 4.5.1 Pairing remote control User can buy Remote control separately and use with SimPal camera, remote control to arm, disarm or make emergency alarm by pressing remote control buttons, user should pair remote control before use. A camera can pair up to 5 remote controls. -
Page 21: Wireless Sensor
SMS to the user: Camera pairing sensor, activate sensor then wait for confirmation SMS. The user needs to make the sensor work and transmit signal to be studied by SimPal camera. When SimPal camera receives the sensor signal, it will emit a Beep tone and send a notification message via SMS: *** sensor load successfully. -
Page 22: Removing Sensor
Disable the alarm upon going beyond limits temperature: #15#0# (41) 4.8 Image size setting The master or family user sends following SMS message to SimPal camera in order to: Change the image size: #22# value # (42) If the value is 1, the image size is 320 ×240(pixels). It’s for a standard small screen ... -
Page 23: Warning Tone Upon Alarm Triggering
#13#1# (52) SimPal camera will call the master and the family user’s numbers for not more than 3 times. If it is still no one answers the call, SimPal camera will then exit dialing mode automatically. 4.14 SMS notification to family number... -
Page 24: Turn On/Off Led Indicator On The Camera
If the LED indicator is on, it will display in different ways to show the working status. If it turns off, it can make SimPal camera private and avoid to be found easily. The Master sends following SMS message in order to:... -
Page 25: Restart The Camera
Then the camera reset to factory setting successfully. Method 2: Reset via SMS command The user sends following SMS message to SimPal camera in order to: Reset the camera: #19# password # (66) Reset 3G module factory setting: Master sending following SMS message to reset 3G module factory setting, it will clean all storage setting and reset the module to factory setting. -
Page 26: Chapter 6 Main Technical Parameters
SimPal-G4 3G Security Camera User Manual General Trouble Possible Reason Solution (Indicator is working) camera. Caller ID presentation or MMS, Cellular Contact network provider to All functions disable data functions of the SIM card do not active SIM card function. Pay for (Indicator is working) active, insufficient fee of the SIM card. -
Page 27: Appendix: Sms Commands List
SimPal-G4 3G Security Camera User Manual Camera pixel 5.0 Megal pixel Camera Shooting angel 68 degree Best shooting distance at night ≤5meters Detect distance of build-in PIR sensor ≤5 meters Listen in distance ≤5meters Lithium battery (Inner) 800mAh Battery standby time 12 hours（Affected by network）... - Page 28 SimPal-G4 3G Security Camera User Manual Category Function Command User function Disable schedule send images (24) #06#0# Master function Master Arming SimPal camera manually (25) #01# Family Disarming SimPal camera Master (26) #02# manually Family Arming or disarming Enable schedule arms the...
- Page 29 SimPal-G4 3G Security Camera User Manual Category Function Command User light Turn on indicator light (58) #31#1# Master Night vision Night vision LED lighting mode (59) #20#mode# Master LED setting and time setting Enabled mains power change (60) #35#1# Master...
Need help?
Do you have a question about the G4 and is the answer not in the manual?
Questions and answers