Rosslare AY-Q54 Instruction Manual
  1. Manuals
  2. Brands
  3. Rosslare Manuals
  4. Keypad
  5. AY-Q54
  6. Instruction manual

Rosslare AY-Q54 Instruction Manual

Keypad reader
Hide thumbs
Table of Contents

Advertisement

Quick Links

ROSSLA R E
ROSSLA R E
www.rosslare.com.hk
ROSSLARE
INSTRUCTION MANUAL
1
2
4
5
8
7
0
AY-Q54
KEYPAD READER
WIEGAND AND CLOCK & DATA
3
6
9
#
08/01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AY-Q54 and is the answer not in the manual?

Questions and answers

Related Manuals for Rosslare AY-Q54

Summary of Contents for Rosslare AY-Q54

  • Page 1 ROSSLARE INSTRUCTION MANUAL AY-Q54 KEYPAD READER WIEGAND AND CLOCK & DATA ROSSLA R E ROSSLA R E www.rosslare.com.hk 08/01...

  • Page 2: Table Of Contents

    Contents Introduction INTRODUCTION The AY-Q54 is a vandal resistant programmable keypad reader. The Technical Specifications AY-Q54 supports multiple keypad formats providing a high level of Key Features compatibility and connectivity with host controllers. INSTALLATION The keypad can be programmed to output eight different data Mounting the AY-Q54 reader formats.

  • Page 3: Technical Specifications

    3) Single Key, 8-Bit Wiegand, Nibbles Complemented 4) 4 Keys Binary + Facility Code, 26-Bit Wiegand Here are some of the AY-Q54's key features: 5) 1 to 5 Keys + Facility Code, 26-Bit Wiegand 6) 6 Keys BCD and Parity Bits, 26-Bit Wiegand...

  • Page 4: Installation

    Drill holes into the back of the metal according to how you want cutting the cable jacket back 1¼ inches and strip the wire ½ to mount the AY-Q54. For US Gang Box installation there are two inch. hole indicators on the back of the metal cover specifically aligned for the US Gang Box.

  • Page 5: Transmit Mode

    Transmit Mode Programming the AY-Q54 When the AY-Q54 is in Transmit Mode, it is ready to receive data Programming the AY-Q54 is done solely via the unit's keypad driven from an entered PIN code. Programming Menu System. To reach the Programming Menu System the AY-Q54 must first be placed into Programming Mode.

  • Page 6: Entering Programming Mode

    The Transmit LED will turn green You will hear one beep Transmit Program The Program LED will turn off This indicates that the AY-Q54 has returned to Transmit Mode. The Transmit LED will turn red Wrong entries may reset the read to Transmit Mode. Note: - Only one keypad transmission format can be active at any one time.
  • Page 7 1 = 0 0001 0 7 = 1 0111 1 2 = 0 0010 0 8 = 1 1000 1 Single Key, 6-Bit Wiegand (Rosslare Format) 3 = 0 0011 1 9 = 1 1001 0 4 = 1 0100 1 = 1 1010 0 = “B”...

  • Page 8: To 5 Keys + Facility Code, 26-Bit Wiegand

    B = Second key entered. E = Fifth key entered. the Wiegand Data lines as binary data in the same format as a 26- C = Third key entered. F = Sixth key entered. Bit Card. AY-Q54 Page 14 06/01 AY-Q54 Page 15 06/01...

  • Page 9: Single Key, 3X4 Matrix Keypad

    “ ” key is pressed within 5 seconds, the keypad will clear the PIN code entry buffer, generate a medium length beep and is ready An optional interface board must be used between the AY-Q54 and to receive a new keypad PIN code.

  • Page 10: Changing The Programming Code

    You must be very careful before using this command! Doing so will erase the entire memory which includes all User and Special Codes, and return all codes to their factory defaut settings. Enter Programming Mode Transmit Program GREEN AY-Q54 Page 18 06/01 AY-Q54 Page 19 06/01...

  • Page 11: Replacing A Lost Programming Code

    Replacing a lost Programming Code Europe, Russia, Middle East, Africa In the event that the Programming Code is forgotten, the AY-Q54 may be reprogrammed in the field using the following instructions: Rosslare Security Products S.r.l Via F.lli Gabba 5, 20121 Milano, Italy Remove power from the reader.

Table of Contents